- Taizhou Huangyan Yuanda Machinery Manufacture Co.,ltd.
YD-3500-B hot filling bottles plastic blowing machine
YD-3500-B hot filling bottles plastic blowing machine
FEATURES:
-High automatization
-High Intelligence: The machine can be controlled through touh screen and running status is shown on it.
-High quality: Steady infrared heating system blowing and highly precise blow mold closing system ensure quality.
-High speed: 2000bhp (2cavity), 4000bph (4cavity), 6000bph (6cavity), 8000bph (8cavity)
- No contamination: closed production zone, good self-lubrication system avoid contamination.
- Low cost: low consumption of power, air and water.
- High transparency: easy maintenance, absolutely safe, visual inspection, low noise.
Information | Items | Technical Parameter |
YD-3500 Hot Filling PET Bottle Blow Molding Machine | ||
Blow Bottle Part | Mold capacity | 4 |
Bottle height (below the pivot ring ) | 1.4m | |
Heating Part | Heating unit | 6 section |
Heating Lamp number | 8 | |
Electric Parameter | Electric voltage | 380V |
Frequency | 50/60Hz | |
Total Power |
| 20kw |
Air Supply | Low pressure compressed air voltage | 0.7~0.8MPa |
Low pressure compressed air consumption | 1.6m3/min | |
High voltage compressed air voltage | 4.0MPa | |
High voltage compressed air consumption | 7.0m3/min | |
Heating Machine Cooling Water (water temperature≤20°C) | Voltage | 0.5MPa |
Flow | 1m3/h | |
Power | 3.5kw | |
Oil Temperature Machine (200°C) (For hot filling bottle) | Voltage | 0.5MPa |
Flow | 1m3/h | |
Power | 10kw | |
Bottle Mold Heating Machine (140°C) (For hot filling bottle) | Voltage | 0.5MPa |
Flow | 0.6m3/h | |
Power | 5kw | |
Weight | Main machine \Heating machine \Electric cabinet | 28t |
Machine Size | Main machine (L×W×H) | 4000mm×1450mm×2000mm |
Embryo machine (L×W×H) | 1300mm×1300mm×2300mm | |
Mold Dimension | Preform height | ≤150mm |
Preform inner diameter | ￠16mm~ ￠ 26mm | |
Pivot ring diameter | ￠ 26mm~ ￠ 36mm | |
Bottle Dimension | Round bottle diameter range | ￠ 50mm~ ￠ 116mm |
Bottle dimension (diagonal line) | 50mm~116mm | |
Section height below the pivot ring | ≤320mm | |
Capacity range | 0.2L~1.5L | |
Perform Material | PET | |
Production Capacity | 2500BPH(500ml hot filling bottle ) |
